Category: concrete pump hoses
点击查看大图
Concrete pump hose DN125=5” 3m 6 wires 20,000m3

Price: $$293/€216.49/¥2000
Specification: DN125=5” 3m 6 wires 20,000m3
Introduction: use pressure 10.5Mpa(105bar), burst pressure 15Mpa(150bar).Use regularly, transport cement 20,000m3
Hits: 247


Detail Description

Our DISCOUNT OF FOB PRICE is up to the amount of order. Maxium discount is about 10%.

ApplicationApplication: Steel cord hose used for placement of concrete at casting location; it is used at the end of the pumps to distribute the concrete. The hose resists to suction during the cleaning process.
Usually supplied with swaged on “Full flow” hardened couplings.
Temperature range: -40°C (-40°F) to +70°C (+158°F)
CONSTRUCTION
Tube: black, smooth, rubber compound, withstands the abrasive action of the concrete.
Reinforcement: plies of steel wire cord.
Cover: black, smooth, (wrapped finish), rubber compound, abrasion and weathering resistant.
Specifications: abrasion loss of tube rubber compound according to DIN 53516: 50 +/- 5 mm3. Binding between rubber and flanges ≧1.5KN/m.
Branding: continuous spiral brand “建力”、“钱峰”or your Brand.



Comments 0 Comments
sorry,no data found!